Mike Tofanelli Illustration Process
Mike Tofanelli Gives the Dish on his Illustration Process
Article Transcript
This is an illustration assignment I did last summer for Westchester Magazine, a full page opener for their 914 section. It accompanied a humorous opinion article about the new “MyPlate” food guide, introduced to the American public by Michelle Obama and the USDA. The premise was that a lot of people find the guide more confusing than educational.
Preliminary Sketches, Brainstorming
The beginning of any illustration starts with small
thumbnail sketches (fig. 1). These are not intended to
show the art director but just to help me figure out what
will work visually. These are quick and rough and I’ll do
as many as it takes. I’m not getting hung up on details
here; my main focus is composition and concept. At the
same time, I am going through reference photos of Michelle
Obama and working on her likeness. The sketch
on the above right (fig. 2) evolved from a thumbnail and
is one of two sketches that I scanned in and emailed to
the art director. You can see the indication of a masthead.
It’s important for me to know its placement and
not let any important elements interfere with it. This is
the one that got approved.
Typically, I submit one or two sketches, as part of my responsibility is to weed out the lame ideas. As an editorial illustrator, I’m hired for my way of thinking as well as my artistic style.
Acrylic Underpainting
I print out my approved sketch at a
comfortable painting size, around
11”x14”, about 125% of final reproduction
size. I tape the sketch
to a sheet of cold press illustration
board and using a graphite sheet
under the sketch, I trace over the
sketch to transfer it to the board. I
refine and redraw my drawing on
the board using 2h or h graphite
pencils and/or Verithin’s brown,
black, and terra cotta colored
pencils.
With the drawing on the board, I now begin my monochromatic underpainting in acrylics (fig. 3). I use a limited palette of umbers and siennas, adding ultramarine blue for my darker mixtures. My brushes are nylon sable (synthetic) rounds. They are resilient and keep a good point, allowing me to draw as well as lay down tone. I establish value patterns keeping my paint fairly transparent so I don’t lose the information in my drawing. It’s especially important for me to reinforce the details in the faces which carry so much interest in this piece. Not concerned with color at this point.
I then cover my board with a transparent wash of yellow oxide/raw sienna using a flat 1˝ brush (fig. 4). This warm veil of tone gives me a great surface to judge my colors and values against and unifies my underpainting. I’ll take a 10-15 minute break and allow this to dry.
Acrylic Rendering
I expand my palette to include
alizarin crimson, cadmium red light
hue, cadmium yellow deep hue, veridian
green, ivory black, and titanium
white, and start applying local
color to flesh, clothing, background,
etc. I begin with “given” colors like
the flesh, and as you can see in fig.
4, I’ve started with the two faces on
the upper right. The idea is to lay
in a midtone translucently so I can
still see my underpainting, and then
block in lights and highlights (more opaque) and dark tones (transparent
to translucent). As I model the
forms, I keep mindful of the direction
of my light source.
I decide my background should be a light value, and yellow will fit the mood of the piece. Establishing this will help greatly in my remaining color decisions. Fig. 5 shows some of the faces starting to come alive.
My painting is achieving volume and form and I like where it’s headed in fig. 6. I will stop short of final rendering and will save that for my next and final phase in Photoshop.
Going Digital
I scan my painting at 355 dpi. Of
course my painting is too large
for my scanner so I scan it in two
pieces and join them together in
Photoshop. Yeah, that part’s a
pain but watcha gonna do? Once
the scans are pieced together and
color adjustments made, I can now
start painting using my 21" Cintiq.
For this final “polishing up” stage, I will paint in RGB and choose colors directly from my painting with the eyedropper tool. Flesh, clothing, background, etc. will be painted on separate layers allowing me to tweak one element independent of the whole. I don’t use a big variety of brushes, just the basic hard and soft round brushes along with the #24 brush.
Before going too far, I drop the MyPlate graphic into the painting on its own layer. I skewed it approximately beforehand, and once in place, I fine tune and skew the perspective until it’s just right. I also lay some brush strokes over the top of it to tie it to its surroundings so it’s less foreign.
Next, I zoom in on important details. In fig. 7 you can see Michelle’s face before (left) and after digital refinement (right). Using a soft round brush and opacity set around 85%, I’ll smooth rough transitions using existing colors in her face. I strengthen highlights and make sure dark accents carry enough weight. I deepen the darks in her hair and define strands with the #24 brush, and I’ve also decided to brighten Michelle’s dress.
These are the type of refinements I will make throughout the rest of the illustration, but will be selective where I lavish my attention. I do not wish to “over model” digitally as I like some of my traditional painted hand to show through.
Around mid morning of deadline day I deem it finished, flatten the file, convert to a CMYK tif, and send it to the art director using yousendit.com. An email back from the art director telling me she loves it makes my day. Here is the final illustration (fig. 8).
Mike Tofanelli is a freelance illustrator and party caricaturist based in Elk Grove, California. His illustrations have appeared in numerous national and regional publications. His work has also been included in American Illustration 27, 29, and 31. Find more of Mike’s work at www.miketofanelli.com and visit his blog at www.miketofanelli.wordpress.com.
This Navigation box may not show up on mobile browsers. Please see Exaggerated Features Issue 2012.3 for the full contents of this issue if the navigation box does not display.